Restrictions apply
Looking for Bathtub Repair Services in South Florida?
Bathtub repair is the most cost-effective and hassle-free solution available for homeowners when they have to deal with a damage to the bathtubs installed in their properties.
For it to come out with the proper finish it normally should be done associated with a bathtub refinishing service at the end of the process.
The nature of the potential damage to be tackled on the bathtubs are very wide. Among the most common problems we find are wear and tear, discoloration, dings, chips, surface depressions, rust, cracks, and holes.
The incidence of the above types of damage depends very much on the material the tubs are made of as well as other factors like how it is used, cleaned, and maintained.
The main materials bathtubs are made of are acrylic or fiberglass, steel, cast iron, and cultured marble.
America Refinishing Pros, as one of the most experienced and reputable bathtub repair companies in South Florida, offers a durable solution to most problems, regardless of the material the bathtub is made of or the nature of the problem.
Let us know if you have any questions. We are here to help you
America refinishing Pros' Bathtub Repair Services Include:
-fiberglass tub repair
-porcelain tub repair
-cultured marble tub repair
-steel tub repair
-cast iron tub repair
-acrylic tub repair
Bathtub Crack Repair
A bathtub crack is normally a kind of damage that appears mostly in fiberglass or acrylic tubs and in some rare cases in cultured marble tubs. The main reasons for this type of issue are poor installation or accidental impact.
Cracks due to poor installation we call them “stress cracks” and tend to happen at the bottom of the tub. These types of bathtub cracks appear after some time of stepping onto that unsupported area, which fails precisely because of the mentioned lack of support. On the other hand bathtub cracks due to accidental impact could occur anywhere in the tub depending on where it was hit.
How to Repair a Cracked Tub?
Normally, fixing a crack in a bathtub when it is due to accidental impact would only take sanding the area down and then filling the crack with waterproof polyester resin. However, when the crack is due to poor installation the problem tends to be more serious and, besides the repair of the surface on the affected area, would require the creation of support to prevent the problem from occurring again.
A bathtub crack repair is very common. As a matter of fact, we deal with quite a few per month. In our article: ”Should I repair my old acrylic my old and damaged plastic (acrylic or fiberglass) tub or shower or should I replace it?” we cover this topic very much in detail.
It’s important to note that the appearance and severity of bathtub cracks can vary. Some cracks may be hairline and barely visible, while others may be more significant and noticeable. Hairline cracks in tubs sometimes are so thin are that may require the use of a magnifying glass and even extra lighting to be able to find them.
If you suspect that your bathtub has a crack, it’s crucial to address the issue as soon as possible to prevent further damage, especially if the property is in an apartment on a higher floor since it could start leaking at any time and cause damage to the neighbors below you.
At our bathtub repair company, we have the expertise and knowledge to handle all types of bathtub cracks, whether they resulted from poor installation or accidental impact. Contact us today to schedule an appointment and restore your bathtub to its original condition.
Here are some before and after pictures of bathtubs we have repaired
Rusted Bathtub Repair
Rust can be a major problem for bathtubs, as it may not only affect the appearance of the tub but could also cause serious structural damage to the same over time. The incidence of rust in bathtubs is often caused by exposure to water and humidity, as well as the use of abrasive cleaning products.
Bathtubs made of cast iron or steel are particularly susceptible to rust, but even those made of other materials can be affected if they have metal components.
The most common areas that suffer from rust damage in a bathtub are around the drain, around the overflow, the corners, and the edges. Those areas can become discolored, and flaky, and even develop holes over time, which can lead to leaks and other issues.
How to Repair Bathtub Rust?
To professionally repair a rusted bathtub, we first clean it thoroughly. All the rust would be removed as well as any dirt or debris. We will try to remove all the rust from the affected area and then the same will be treated with a rust converter, which will neutralize any possible rust that may have remained preventing it from spreading.
Once the rust converter has been applied, we need to reconstruct the affected area and smooth out the surface. After that, we apply a bonding agent and then the tub would be sprayed with our advanced topcoat, which is a rust-inhibiting product among other amazing properties.
If you are looking for information about this topic, in our article: “is porcelain tub refinishing a good idea“? we cover most of the ins and outs of the same.
Chipped Bathtub Repair
A chipped bathtub can be a frustrating problem for many homeowners since it considerably detracts from the appearance of the bathroom.
Chips affect pretty much tubs of all materials: acrylic or fiberglass, porcelain (steel and cast iron) and cultured marble. The main reason for it to occur is accidental impacts.
The size of the chip is generally directly proportional to the strength of the impact. Small chips (half an inch or less in diameter) most of the times are caused by drops of medium size cans or bottles when people are taking a shower, while bigger chips are normally due to either accidental impacts or drops of heavier objects like tools, tiles, etc.
The repair of chips on bathtubs is normally not too complex and has an excellent outcome.
How Much Does it Cost to Repair a Bathtub?
The cost to repair a bathtub ranges from $300 to $1,200 and it basically varies depending on four main factors: the nature of the damage, the extent of the damage, the area of the country where the property is located and the material the tub is made of.
The bigger and more serious the damage the higher the price. For example, just a small chip would be around $320 including the refinishing of the whole tub, while a fiberglass tub with a serious crack that needs support could cost easily $600 in the cheapest markets.
Additionally, if there is damage to multiple areas of the bathtub, the repair will ussually be more expensive than if it’s just in one area.
Is it better to Replace or to Repair a Bathtub?
When it comes to dealing with a damaged or a worn-out bathtub, homeowners are often faced with the decision of whether to repair it or to replace it. While replacing a bathtub may seem like the easiest option, it can be a costly and time-consuming process. In contrast, bathtub repair offers a number of benefits that make it a much wiser choice.
One of the main benefits of bathtub repair is that it is significantly less expensive than replacement. A full bathtub replacement can cost thousands of dollars, whereas repairs can often be completed for a fraction of the cost (usually 75% less).
Additionally, the process of repairing a bathtub is typically much quicker and less disruptive than a full replacement. A tub repair can often be completed in just a few hours and it could even be combined with a tile refinishing service for a more comprehensive and complete renovation of the bathroom space, whereas a replacement can take several days or even weeks to complete.
Another advantage of bathtub repair is that it eliminates the need for demolition, dust, debris and permits. With a full replacement, a significant amount of time and effort must be spent on removing the old bathtub, demolishing the tile walls and preparing the space for the new one. This can be a messy and time-consuming process that generates a lot of debris and dust.
Finally, bathtub repair with bathtub refinishing is a more environmentally-friendly option than replacement. When a bathtub is replaced, the old tub is often sent to a landfill, where it can take hundreds of years to decompose. With a repair, the existing tub can be used for many more years, reducing the amount of waste sent to landfills.
Call America Refinishing Pros and we will be able to provide you with an estimate based on your specific scenario. We have many years of experience and thousands of bathtub repair services successfully delivered. We have hundreds of testimonials on Google, Yelp, Angi, Thumbtack and all over the internet to prove it.
Let us know if you have any questions. We are here to help you
We put passion into each project and we take the satisfaction of our customers very seriously
What Our Clients Say
